Our Products

 

RECOVERY GEAR




RECOVERY EQUIPMENT BAG

The strong Recovery Bag is manufactured from heavy duty nylon with a fluorescent safety triangle on the back of the bag. All items illustrated can be purchased individually.

           

SNATCH-STRAPS

Snatch-Strap is a vital part of any 4WD recovery kit. It should be the first choice of all recovery equipment when preparing a 4WD. Manufactured from a high elongation, rot and mildew resistant polymidie nylon fibre.

Deluxe Snatch-Strap

  • Reinforced eye guards for added durability

  • Additional stitching for extra strength and extended life.

Size: 50mm x 9m with 8000kg Break Load.

           

WINCH STRAPS

Winch straps are designed to be used when extra rope length is needed for winching operations. Made of non stretch synthetic webbing, winch straps are available in 5, 10, 20 and 30 metre lengths with a break load of 4500kg. Each strap is 50mm wide with reinforced eyes at each end.

Warning: Winch straps must not be used as Snatch-um-straps.

           

D & BOW SHACKLES

Galvanised then powder-coated yellow, the load rated "D" and "Bow" Shackles play an improtant link in joining equipment in recovery situations.
Both shackles are available in 16mm and 19mm sizes.

SHACKLE RATINGS

D-Shackle

Work Load Break Load
16mm 1500kg 8800kg
19mm 2000kg 11800kg
Bow Shackle Work Load Break Load
16mm 3200kg 17600kg
19mm 4700kg 25800kg

           


TREE TRUNK PROTECTORS

When winching or anchoring to a tree, a tree trunk protector is vital to protect the tree from ring barking and to protect the winch cable from unnecessary wear. Tree Trunk protectors are made of high strength non-stretch webbing and are 3m long x 75mm wide. The straps are 12 tonne breaking strain and feature reinforced eyes.

           

SNATCH BLOCKS

Snatch Blocks effectively double the capacity of the winch. They are also useful in recovery situations where the winch the winch anchor point is not in a direct line of the vehicle winching direction.

  • 12mm Wire Rope Size

  • 8000kg Capacity
  • Pulley diameter 125mm
  • Greasable Shaft

           

DRAG CHAINS

Hi-tensile 4WD Drag Chains are ideal for assisting in winching applications and the removal of fallen trees. The 5m long x 8mm wide chain is fitted with a grab hook and lug link.


HI-LIFT JACK

One of the most versatile items of recovery equipment, the Hi-Lift jack with its 1000mm lift will provide a means of lifting the vehicle to aid recovery. In an emergency situation it can also be used to remove the vehicle from an empeding obstacle by attaching a cable at each and using it like a hand winch with the rated capacity of 3600kg.

           

AIR JACK

Australian designed and manufactured, the 4000kg lifting capacity exhaust operated air jack is ideal for use in muddy or sandy situations. The Air Jack is attached to the exhaust and uses the exhaust gases to inflate the bag. Deflate the airbag by releasing the valve on the hose unit and the gas is slowly released, lowering the vehicle at the desired speed.

The Air Jack must only be used as an aid for vehicle recovery. It should not be used as a 'garage' jack for vehicle maintenance.



Copyright 2013 FOUR WHEEL SUSPENSION  PARTS SDN BHD,
Designed & Maintained by